Flexible Jointのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 BtoB における情報を集めた国内最大級の技術データベースサイトです。

Flexible Joint×中日技研工業 - メーカー・企業と製品の一覧

Flexible Jointの製品一覧

1~6 件を表示 / 全 6 件

表示件数

Spherical Rubber Flexible Joint 'F-FLEX'

Vibration absorption, absorption of piping expansion and displacement, excellent vibration isolation effect and pressure resistance.

"F-FLEX" is a flexible joint made of spherical rubber, handled by Chūnichi Giken Kōgyō Co., Ltd. It offers vibration absorption, accommodates expansion and displacement of piping, and provides excellent vibration isolation and pressure resistance. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (Note: This may vary depending on usage conditions.) ■ Maximum operating temperature: 70°C (Note: This may vary depending on usage conditions.) ■ If the operating pressure is negative (vacuum), please use the embedded rubber type. ■ If the fluid is gas, the maximum operating pressure will change, so please inquire. ■ For fluids such as wastewater and powders that tend to accumulate in the mountain part, the embedded rubber type is recommended. (1) Cannot be used for hot water piping. (Please use D-FLEX.) (2) Cannot be used for pool water. (Please use D-FLEX around circulation pumps for pool water, etc.) (3) Cannot be used in areas where pressure fluctuations occur frequently, such as on the delivery side of pressurized or booster water pumps. (4) Generally, cannot be used with fluids or installation locations that may deteriorate the elasticity of the rubber. *For more details, please refer to the PDF document or feel free to contact us.

  • Piping Materials
  • Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2 Mountain Spherical Rubber Flexible Joint 'FW-FLEX'

Excellent vibration-damping effect and pressure resistance, dual-mountain spherical type.

"FW-FLEX" is a flexible joint made of rubber with a double-bulb shape, handled by Chūnichi Giken Kōgyō Co., Ltd. It offers excellent vibration damping and pressure resistance. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 70°C (However, this may vary depending on usage conditions.) ■ If the operating pressure is negative (vacuum), please use the embedded rubber type. ■ If the fluid is gas, the maximum operating pressure will change, so please contact us. (1) It cannot be used for hot water piping. (Please use D-FLEX.) (2) It cannot be used for pool water. (Please use D-FLEX around circulation pumps for pool water, etc.) (3) It cannot be used in areas where pressure fluctuations occur frequently, such as on the delivery side of pressurized or booster water pumps. (4) It cannot be used with fluids or installation locations that may degrade the elasticity of the rubber. *For more details, please refer to the PDF document or feel free to contact us.

  • Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Spherical Flexible Joint "D-FLEX"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"D-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chuo Nikkigiken Co., Ltd. Since the liquid-contacting part is made of fluororesin, it has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum Operating Pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum Operating Temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps where pressure fluctuations occur frequently. (2) Due to the characteristics of the material, there is a possibility that sealing performance may decrease. In this case, please perform re-tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

  • Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Cylindrical Flexible Joint "T-FLEX S"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

The "T-FLEX S" is a cylindrical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the inner surface is straight, there is no liquid pooling. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is gas, the maximum operating pressure will change, so please inquire. * If you exceed the maximum operating pressure (1.0 MPa), please contact us as we will conduct a separate structural review. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps where pressure fluctuations occur frequently. (2) Due to the characteristics of the material, there is a possibility of decreased sealing performance. In this case, please either retighten or use a gasket. * For more details, please refer to the PDF document or feel free to contact us.

  • Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Spherical Flexible Joint "DL-FLEX"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"DL-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the liquid-contacting part is made of fluororesin, it excels in heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized water pumps where pressure fluctuations occur frequently. (2) Due to the material properties, there is a possibility of reduced sealing performance. In this case, please perform additional tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

  • Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Cylindrical Flexible Joint "T-FLEX C"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"T-FLEX C" is a cylindrical flexible joint covered with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. The inner surface is a corrugated hose, allowing it to accommodate a large amount of eccentricity. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is gas, the maximum operating pressure will change, so please contact us. * If used beyond the maximum operating pressure (1.0 MPa), we will conduct a separate structural review, so please contact us. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps, where pressure fluctuations occur frequently. (2) Due to the characteristics of the material, there is a possibility of reduced sealing performance. In this case, please perform additional tightening or use a gasket. * For more details, please refer to the PDF document or feel free to contact us.

  • Pipe Fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Flexible Jointに関連する検索キーワード